CO2 Emergency Stop Station (DSE-1)

  • CO2 Emergency Stop Station (DSE-1)
  • CO2 Emergency Stop Station (DSE-1)
  • CO2 Emergency Stop Station (DSE-1)
106,00 EUR
/ szt.

Helppo tuotepalautus

Osta tuote ja tarkista se omalla ajallasi kotona.
Voit palauttaa tuotteen ilman syytä 14 päiviä.
Näytä lisätiedot
14päiviä palautukseen
Tyytyväisyytesi on meille tärkeää, siksi voit palauttaa tuotteen antamatta syytä 14 päiviä.
Ilman huolia ja murheita
Voit ostaa rauhassa tuotteita ja olla varma että palautusprosessi on yksinkertainen ja helppo.
Helpot palautukset velho
Kaikki palautukset
  • Input Voltage: 100~240 VAC, 50/60Hz
  • Output Current: 10A
  • Output Voltage: 100~240 VAC, 50/60Hz
  • Working Environments: Temperature 32-122°F, Humidity

The DSE-1 CO2 Emergency Stop Station provides a simple method to shut off the CO2 supply when any fault or high CO2 level is detected. It is a 120V controlled outlet that supplies the power to CO2 solenoid valves in normal  operation . The Carbon-X will then automatically shut off DSE-1 power if any fault or high CO2 level is detected within any of the installed CO2 sensors. If the DSE-1 loses communication with the Carbon-X, the power supply will also be disabled.

 

LED status:
* Blinking green FAST: If the LED is blinking quickly, that means the module has not been addressed to the controller OR that module does not have a good connection to the controller. *Pressing the small button on the module will address/link the module when first installed.
* Blinking green SLOW: If you see a slowly blinking green LED, that means the module is addressed and connected to the controller, and the module is currently turned OFF.
* SOLID green: If you see the LED is on solid (no blinking) that means the modules are addressed, connected and currently turned ON.
* Blinking red: If you see the LED change to blinking red, that means the module has been overloaded. To reset the overload unplug the module from the power.

 

Package Content:

1 x Emergency Stop Device Station

 1 x 16ft RJ12 Cable

 1 x  4ft RJ12 Cable

 1 x  RJ12 T-Splitter

 

Specification:

Input Voltage:                              100~240 VAC, 50/60Hz

Output Current:                            10A

Output Voltage:                           100~240 VAC, 50/60Hz

Working Environments:                Temperature 32-122°F, Humidity<=90%

Package Dimensions:                   85mm(L) x 80mm(W) x 90mm(H)

G.W. per pack:                            0.34kgs

Käyttäjien arvostelut
Lisää arvostelu:
Ketään ei tähään hetkeen mennessä arvioinut tuotetta. Ole ensimmäinen. Sinun mielipiteesi tulee näkyville kaikille asiakkaille meidän hyväksynnän jälkeen.
Pisteesi:
Sisältö:
Lisää kuva:
Kysy tätä tuotetta:

Jos kuvaus ei ole riittävä, niin voit kysyä meiltä tuotteesta. Vastaamme niin nopeasti kuin vaan voimme.

Sähköpostisi:
Tämä kenttä on pakollinen tilausta varten.
Kysymykset:
Tämä kenttä on pakollinen tilausta varten.
Kentät merkitty - Tämä kenttä on pakollinen tilausta varten.- ovat vaadittu
This page uses cookie files to provide its services in accordance to Cookies Usage Policy. You can determine conditions of storing or access to cookie files in your web browser.
Close
pixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixel