Gavita Pro 315W SE CMH 3000K

  • Gavita Pro 315W SE CMH 3000K
392,37 EUR
/ szt.

Helppo tuotepalautus

Osta tuote ja tarkista se omalla ajallasi kotona.
Voit palauttaa tuotteen ilman syytä 14 päiviä.
Näytä lisätiedot
14päiviä palautukseen
Tyytyväisyytesi on meille tärkeää, siksi voit palauttaa tuotteen antamatta syytä 14 päiviä.
Ilman huolia ja murheita
Voit ostaa rauhassa tuotteita ja olla varma että palautusprosessi on yksinkertainen ja helppo.
Helpot palautukset velho
Kaikki palautukset
  • Teho: 315W
  • Valonlähde: Philips CDM 930 Agro
  • Tarkoitettu: kukinta

The Gavita Pro 315e SE is available with the Philips 315W 3000 Kelvin lamps (for flowering) or 4200 Kelvin lamps (for vegetative or supplemental use). It is a compact fixture with a new type of reflector mounting system: Instead of a bracket which holds the reflector on both sides, the reflector is now clipped on the ballast housing itself. This reduces size and weight, enables easy replacement and provides optimal positioning and stability of the small reflector.

Input current at 100% 1.4 Amps
Input power at 100% 330 Watt
Light source Philips CDM 930 Agro or 942
Reflector M 140 SE CDM 315
Lamp base PGZX18

Features & Benefits

Suitable for Gavita Master Controllers

Our CMH ballasts ballasts can be remote controlled by our Gavita Master Controllers. CMH lamps can not be dimmed without deterioration of the light maintenance over time, and restart problems. However, the Repeater Bus interface enables timing control and safety features with the Gavita Master controller. With this you can also integrate the fixture as a supplement light to a HPS layout.

Ideal for fixed installation

Ideal for fixed installation with brackets on Unistrut (C profile) systems, the Repeater Bus cabling system allows you to daisy-chain the fixtures in your installation. A Repeater Bus interconnect cable is included with every fixture. You can connect 5 strings of 100 fixtures per Master controller port. This enables you to control up to 1000 fixtures on one EL2 controller.

Available with 930 Agro or 942 lamp

We recommend the 4200° Kelvin CDM Elite 942 for supplemental light and vegetative cycles. The 3000°Kelvin CDM Elite Agro 930 Agro is most suitable for generative cycles and stand-alone use. The 930 Agro has added red light in the spectrum which results in higher efficiency.

Complete fixture

The integration of ballast and reflector results in a compact fixture. No external lamp wires result in low EMI, which makes the fixture compliant with FCC regulations. All CMH fixtures are FCC tested and compliant.

No moving parts, optimal thermal management

Our ballasts are completely sealed and passively cooled through the aluminum housing. The optimized thermal management keeps the electronics much cooler than in die-cast housings. This extremely important for the lifetime and reliability of the internal electronics.

Balanced fixture

The fixture is balanced, so it can be mounted by just two hanging points. This enables easy installation by brackets from C-profiles for example.

Käyttäjien arvostelut
Lisää arvostelu:
Ketään ei tähään hetkeen mennessä arvioinut tuotetta. Ole ensimmäinen. Sinun mielipiteesi tulee näkyville kaikille asiakkaille meidän hyväksynnän jälkeen.
Pisteesi:
Sisältö:
Lisää kuva:
Kysy tätä tuotetta:

Jos kuvaus ei ole riittävä, niin voit kysyä meiltä tuotteesta. Vastaamme niin nopeasti kuin vaan voimme.

Sähköpostisi:
Tämä kenttä on pakollinen tilausta varten.
Kysymykset:
Tämä kenttä on pakollinen tilausta varten.
Kentät merkitty - Tämä kenttä on pakollinen tilausta varten.- ovat vaadittu
Zamknij
Jplayer
This page uses cookie files to provide its services in accordance to Cookies Usage Policy. You can determine conditions of storing or access to cookie files in your web browser.
Close
pixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixel