Aqua Master Digital Monitor P700 Pro

  • Aqua Master Digital Monitor P700 Pro
  • Aqua Master Digital Monitor P700 Pro
233,28 EUR
/ szt.

Helppo tuotepalautus

Osta tuote ja tarkista se omalla ajallasi kotona.
Voit palauttaa tuotteen ilman syytä 14 päiviä.
Näytä lisätiedot
14päiviä palautukseen
Tyytyväisyytesi on meille tärkeää, siksi voit palauttaa tuotteen antamatta syytä 14 päiviä.
Ilman huolia ja murheita
Voit ostaa rauhassa tuotteita ja olla varma että palautusprosessi on yksinkertainen ja helppo.
Helpot palautukset velho
Kaikki palautukset
  • Mittausalue
  • pH 0.0 ~ 14.0 pH
  • Temperature: 0 °C ~ 50 °C (32 °F ~ 122 °F)
  • EC: 0 ~ 1999 us/cm
  • EC: 0.0 ~ 19.9 ms/cm
  • TDS: 0 ~ 19990 ppm
  • TDS: 0.00 ~ 19.99 ppt
  • Temperature: 0ºC ~ 50ºC
  • Tarkkuus pH:
  • ±0.1pH
  • EC: ±2%F.S
  • pH, EC, PPM, TDS, US, Temp
  • 95x61x20 mm
  • 500g

 

The P700 Pro is a digital monitor that ensures fast and accurate measurements. The meter is especially suitable for measuring pH, EC, PPM, CF, and temperature values ​​in liquid plant foods and water ponds. Optimal pH, EC, PPM, CF, and temperature values are crucial for your plants’ growth.



The meter has a large display where you can read all values. The electrodes are easy to replace in case they are worn or broken. The buttons allow you to switch between parameters. A rechargeable battery is included, so even when you have no access to power, you will still be able to use the monitor and do not need to purchase batteries.



It is possible to keep the electrodes in the liquid continuously to constantly measure the values. However, this means that the electrodes need to be calibrated more frequently.



Usage



  • Simply plug the AC adapter into a power outlet and the USB connector into the monitor.

  • Connect the pH electrode to the probe inset of the instrument.

  • Remove the pH and EC electrodes’ protective cover.

  • Turn on the meter.

  • Immerse the pH and EC electrodes in the fluid you want to test and stir gently until the reading stabilizes.

  • Press the C/F key, to switch between Celsius and Fahrenheit.

  • Press the MODE key to cycle through EC, CF, and PPM measurements.

  • Turn off the meter after use.

  • Rinse the pH and EC electrodes using tap water to minimize contamination.

  • Replace the EC electrode’s protective cover.

  • Fill the pH electrode’s protective cover with a storage solution and replace the cover.

  • You can also use the meter continuously by leaving the electrodes in the fluid you want to test.

  • Please note that when the meter is used continuously, it will require calibration regularly. It is also important to regularly check for algae infestation and to carefully clean the electrodes when needed.

Includes

  • 1 x P700 Pro 2 digital meter

  • 1x pH electrode

  • 1 x electrode of EC, CF, PPM

  • 1 x user manual (NL, DE and EN)

  • 1 x rechargeable battery with adapter

Device warranty 1 year
Warranty for electrodes 6 months


 

Käyttäjien arvostelut
Lisää arvostelu:
Ketään ei tähään hetkeen mennessä arvioinut tuotetta. Ole ensimmäinen. Sinun mielipiteesi tulee näkyville kaikille asiakkaille meidän hyväksynnän jälkeen.
Pisteesi:
Sisältö:
Lisää kuva:
Kysy tätä tuotetta:

Jos kuvaus ei ole riittävä, niin voit kysyä meiltä tuotteesta. Vastaamme niin nopeasti kuin vaan voimme.

Sähköpostisi:
Tämä kenttä on pakollinen tilausta varten.
Kysymykset:
Tämä kenttä on pakollinen tilausta varten.
Kentät merkitty - Tämä kenttä on pakollinen tilausta varten.- ovat vaadittu
Zamknij
Jplayer
This page uses cookie files to provide its services in accordance to Cookies Usage Policy. You can determine conditions of storing or access to cookie files in your web browser.
Close
pixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixel